VIS testers on ebay
I bought one of these this week, very handy bit of kit, both mine found to be working fine, if I can find the 2 I repaired for spares I'll test them as well.
http://www.ebay.co.uk/itm/2618403174...%3AMEBIDX%3AIT |
If I hadn't of bought I new inlet with VIS it would make perfect sense to buy one of these. Look a good bit of kit :)
|
I bought one a while ago as had a few vis motors to test. Found that 6 out of 8 were duff! So I have some repairing to do.
|
Damn, I made one these out of some spare wires years ago. Should have boxed it up to knock them out on ebay. Only a few pounds to make! Reminds me I should repair my old ones for spare aswell.
|
Spare ones tested, power motor works fine, balance motor has a failed micro switch, some soldering practice coming up
|
Tempting. Cheers Pete for the link.
|
nice, think i will get one of these. Mine sounds like a rattle can, have another but could do with testing :-)
P. |
Does anyone have a guide on how to test, 2.5k sounds like a Rattle can for a second as you push up the rpm.
|
I tried to repair the non functioning balance motor today, I resoldered the microswitch but it made no difference so I've ordered some microswitches, and a new relay pack.
|
Stocktake (Dave) on another forum is trialing test buttons for the VIS motors, which you just press to see if they are working. Much cheeaper than the ebay testers & no fiddling about plugging/unplugging just a press to test. Having mine done when he's found the right ones (for reliability). Seen them working & fitted to the motors.
|
All times are GMT. The time now is 01:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk