Where is it now then .... ?

I'm desperate ..... :cry:

With Kev, sure he will be in contact with you :)

I have it just now, was do some checks on it regards correct operation etc, No problems found, I have been away on business, so will try and get it posted this week.

Hi all,just want to put my name down for the tester when its available.Thanks

1 - Dan1971
2 - Bowthruster

Could I be added to the list as well Thanks

1 - Dan1971
2 - Bowthruster
3 - Rossy


Anyone else, just copy and paste the list and add yourself to the end.

1 - Dan1971
2 - Bowthruster
3 - Rossy
4 - MickUK


:mml:

Righty ho, I need to send the kit out this week, Dan can you PM your FULL Address again please :)

Done ....

This has fairly done the rounds :)

I found it an invaluable bit of kit, great work from Kev.

Now with "Bowthruster" ....

You get much luck with them then?

Updated the list...

1 - Bowthruster
2 - Rossy
3 - MickUK
4 - Shycho

You need to be a site subscriber buddy.

Just signed up today. Do I need to wait a particular length of time, before I can join in on these type of threads?

Don't think so mate, long as you've paid your dues as it were.

All finished with,no probs,All vis's fine.:clap2: Rossy can you pm your address to me.Thx

How long is the list because it would be nice to test mine.... No wait spotted it... I will add my name to it tonight when im not on the iPod.

Mine were both shagged mate ....

Just been posted,Now on the way to Rossy

woo hoo!!!


:trampoline:

1 - Rossy (Currently on its way)
2 - MickUK
3 - Shycho
4 - Lawrence-zs180

Tester arrived today ... was like christmas again !! hope to get them tested asap then I will forward on to next on the list .Will Pm that person when away to post on for address .....

Been looking at the tester one amazing piece of kit and box , but could I ask what is the change direction switch for ....

Course you can ... ;)

The motors actually turn parts inside the manifold. When you plug the tester into the motor, by moving the direction switch, the motor gets a message to turn. If the vis motor is working you'll hear the motor turn and get the green light. Simples.

Thanks for that ...now is that for balance as well as the power , my power one's motor runs and green light but the balance motor gets a green light but does not run .... just me being a bit dim ...kept in the cold to long up here !!!!
cheers all

Yep both motors.

When you have the switch on the tester set to the right motor you are testing - flip the direction toggle to make it move the motor. Then flip the direction toggle the other way. The motor turns through about 45 degrees. Basically as you change the direction, the motor should move and the green light come on.

The "Change Direction" sends the motor backwards and forwards, Rossy, didnt know you were in Dundee mate.

If any the motors isnt doing anything, then its pumped, and needs repaired/replaced.

Thanks for that advice tested tonight and looks like my balance vis motor is gubbed I get a green light but no movement from the motor in any direction ... This all I need at the moment still trying to rebuild up my dash and centre console having trouble with wiring and now a new vis needed, had a look at vulcan racing didn't realise how expensive they are to replace ..oh well need to source one and get that tested so I can pass on the tester asap .

Dude, I have a number of VIS motors (Power and Balance) that I maybe able to kick back into life, a few from members on here (these are gubbed), and a few I liberated from a scrappy, which show some promise, If and I mean If, I maybe able to help you out, I'm going down to Wales next week, so it will be some time after that.

I've got a spare checked and tested, that Kev sent me in return for my old gubbed motor.

I propose that you bung me enough to cover postage and then send your gubbed one to Kev to look at.

That should work out the cheapest way for you and get it all sorted quickly.

Well thanks to Dan and Kev and his tester my balance motor is now sorted and I will be sending on to Mick uk as next on the list . Once again a big thanks to Dan and Kev for helping me out ...cheers lads now to conquer the on going saga of my electrics ..( head scratch)..time .............

folks,

Can i borrow the VIS tester please, will pay postage etc...

Kev,

If one the VIS motors is gubbed i may need your help to revive it....coffee and jaffa cakes are on offer...:yes:

Any idea when this will be on it's way sir?

Site supporter required mate .... ;)

Sorry about the tester but have just got out of hospital and will be on it's way mick hope to be back on my feet this weekend ...Sorry again for delay out with my control I'm-afraid just to add to all my problems !!!!!

No worries! Just didnt know if it had been sent & lost by the royal of the mail! Take it easy & send it when you can :thumbsup:

KevG's VIS tester
 

1 - Rossy (Currently with Rossy)
2 - MickUK
3 - Shycho
4 - Lawrence-zs180
5 - R8NMG

Time for another check, had a Golf GT 1.4TSI 160PS pulling away from me on a straight. Unless that square box had it chipped.

They are quick little cars .....