180 Inner wing induction kit
 

as title anybody got a inner wing induction kit set up that they want to sell for a 180..

can someone who has done this mod give me the exact sizes etc for the pipework & correct sizes for the joins (silicone) so I can buy what I need to do the conversion...

& if possible were you got all the bits to do it...

Would be interested myself.

i used this for sizes...hope it helps

http://i1107.photobucket.com/albums/...ps1dee8900.jpg

Believe you need a 72mm to 76mm reducer for the throttle body then 76mm piping although thats just off the top of my head.

and this is what I constructed lol :)

http://i1107.photobucket.com/albums/...psd3caa800.jpg

http://i1107.photobucket.com/albums/...psed6d33f6.jpg

http://i1107.photobucket.com/albums/...psbb9b45b5.jpg

Hope this gives you an idea...cost me about £80ish

I thought the OD of the throttle body was 76mm and TBH you could compress a 76mm hose to 72mm with no detriment to sealing.

Maybe I used a reducer on the 120?! Just looked at my pictures and I bought 500mm of silicone tubing and 2 90deg alloy bends. Just went with a small filter for the breather.

I have one now redundant in my garage :( as it came off the 180, sounded awesome and really did improve things.
I used 76mm all throughout and the silicone connector didn't have any issues with sealing on the throttle body. All went great.

I have found a pic of it when new before and during fitting when was on mine.

http://i1123.photobucket.com/albums/...y/33ecbcba.jpg

http://i1123.photobucket.com/albums/...y/afaf7192.jpg

Bit dirtier now but all as good as it was.
Make a kit up like this one and you'll love it.

Craig - I like that - bring it over ... ;)