Pulled my o/s skirt off, to sort out the front sticky out bit.

But being lazy, thought I'd leave the stud things underneath alone and just pulled the top of the skirt back and get in that way.

Two of the rear clips came away from the skirt, plus the rearmost clip and the front clip that had pulled out and twisted back. That was why the front of the skirt was pushing out. Did get the very first stud out, to help get at the front bit.

Cleaned all the clips, de-rusted and painted them, even though I have a new set of s/s ones, bought off ebay.

Anyway, clipped them all back in and covered them with adhesive stuff to stick back on to the actual skirts, to pull it all back together.

Front was OK, but the back now has a bit of a gap, still you only see it with the door open!!! Was going to drill and screw front and rear at the top to help it.

Have to be OK till I can get the sill right off and do it properly!!!!!!!!!!!!!!!1

You need a yellow engine mount bush to finish it off :)

I know, im slowly trying to get him to look smart and tidy. :smile1:

Break in the rain clouds, managed a bit more "touching up painting"