Coilovers wanted
Hi all, after a set of coilovers for a 180 either AVO or Gaz, have to be un-siezed and not leaking. Height and stiffness adjustment are a must.
Let me know what you got. Cheers, Phil |
Upgrading from the civic ones now or is this for another car? How did they fair after a year of use on the diesel out of interest?
|
Hey, the civic ones are still going strong thanks, been on since the October before last. I just want to upgrade because you can't adjust stiffness of the civic ones so when you go really low they get quite soft.They are fine for a 50mm drop or so though.
|
Fair play then mate, wondered how they were doing a while ago. I thought if going very low you would start to notice the difference but if theyre still going strong you cant complain i suppose.
Looked good on them too. Anyway I hope you get a response about the proper setup for it.:D |
Any interest on new?
|
May be interested, depends on what make / model you are offering and at what price. Im not exactly flush at the moment hence looking for second hand but let me know whats on offer :)
|
why not change the springs for stiffer ones?
|
That's a good idea but I wouldn't know where to find any.
|
they will likely be 2.25" or 2.5" internal springs, so you need to measure internal diameter, from there work out a suitable rate and length.
they come up on forums from track car users second hand, or new you could try faulkner springs or ebay, jjc on ebay. why not post a wanted across the forums? |
Its a good idea with the springs but if Im going to all that trouble I might as well upgrade the dampers too at the same time for little extra money. Cheers for the PM though, I appreciate it.
|
All times are GMT. The time now is 07:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk