Mk1 MG ZS boot lid and spoiler fittings.
Hey guys
The MK1 Saloon boot lid, is the fitting holes the same for the low spoiler and the extreme spoiler? Looks like I may have found a replacement boot if so. |
think so mate
|
I am sure another 2 need to be drilled, because the extreme is 6 holes and small is 4 holes.
Stephen |
Thats fine, I can manage that
Bought this for ?59.95 delivered. (i reckon I can sell the spoiler for ?20) http://i406.photobucket.com/albums/p...odder/boot.jpg |
stephens right the extreme spoiler has 6 screws mate,as i had to drill 6 when i changed the bootlid
|
Apparently some people just use the 4 holes when changing from the lower spoiler to the extreme to save drilling more. The threads I have read in the past about it say that no one has a problem with it, especially if you use strong adhesive tape as well as the bolts.
|
It uses the same 4 off fixing holes as the small spoiler, you can easily drill the other 2 inboard ones by laying masking tape along the boot edge. Use the 4 off existing holes to line the extreme one in position and mark around the remaining 2 off studs. Drill, deburr, clean and protect, job done.
|
All times are GMT. The time now is 07:19 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk