theMGZS.co.uk  :: MG ZS forum

theMGZS.co.uk :: MG ZS forum (https://www.themgzs.co.uk/vb/index.php)
-   Parts Wanted (https://www.themgzs.co.uk/vb/forumdisplay.php?f=29)
-   -   Lower Engine mount L Series (https://www.themgzs.co.uk/vb/showthread.php?t=22881)

Nobrainer 08-10-12 01:06 PM

Not sure why you need a new bar? And arent there bushes available for the other side as well?

DuckFeet 08-10-12 02:59 PM

Quote:

Originally Posted by Nobrainer (Post 276426)
Not sure why you need a new bar? And arent there bushes available for the other side as well?

Convenience of fitting the bush before swapping over bars, not getting under car twice.
Yes, but for like £20! Deemed not worth it I think, upper only though - I may be talking rubbish, just noticed the TD uses a different bar then the 180. Would it be inadvisable to use the wrong one?

see top left, cheers for the pic Roverdose.
http://i16.photobucket.com/albums/b5...tabilisers.jpg

Not the same as the one Pete pictured at all.

Huffy 10-10-12 06:16 PM

Ok.... An getting totally confused now, I have a set if the large bushes now, they arrived today, are the bushes different on the180? mine is a diesel after all?

petet16 10-10-12 06:36 PM

The large bush is the same, the Mumby ones are Orange, and I reprofiled them to make sure they didn't transmit any more noise/vibration than the standard bush, the other Yellow ones are either Powerflex or Superflex, same bush, different colour.

petet16 10-10-12 06:41 PM

I see your confusion now, the lower bar in Duckfeets pic won't fit a diesel.

Huffy 10-10-12 07:22 PM

Am still confused.... Lol

Huffy 10-10-12 07:24 PM

Can I replace the old bushes, the large ones with new poly ones(orange) using my existing bar? I just have to take it off?

petet16 10-10-12 07:27 PM

Quote:

Originally Posted by Huffy (Post 276698)
Can I replace the old bushes, the large ones with new poly ones(orange) using my existing bar? I just have to take it off?

Yes

Huffy 16-10-12 09:41 PM

All done. Old one dropped straight out, new one popped in! Now to get the down pipe sorted and a good old service:)

petet16 16-10-12 09:47 PM

Good stuff, pleased with the new bush ?


All times are GMT. The time now is 08:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk