My mg zs120 project
 

Swapped this for a £230 pug 206sw about 6 weeks ago with mot till November.
It's had head gasket, water pump and cambelt kit + auxiliary belt and new alternator and starter motor fitted by previous owner . Needed new rear discs and pads and cv joints both sides I've now done the cv joints and new rear discs and pads coming tomorrow, but the noise I thought was due to the cv joints turned out the be the diff bearings . So fitting a gearbox that's done 60k soon.
Only mods I've done so far is fitted front fogs, led numberplate and sidelight bulbs, sprayed grilles gloss black and a performance backbox https://uploads.tapatalk-cdn.com/201...1d7c3fed1a.jpghttps://uploads.tapatalk-cdn.com/201...3d71b4239c.jpghttps://uploads.tapatalk-cdn.com/201...904eacea95.jpghttps://uploads.tapatalk-cdn.com/201...ecf25d844d.jpghttps://uploads.tapatalk-cdn.com/201...5065bc67b5.jpghttps://uploads.tapatalk-cdn.com/201...85a19e306a.jpghttps://uploads.tapatalk-cdn.com/201...79d6855c42.jpghttps://uploads.tapatalk-cdn.com/201...dead6c7082.jpghttps://uploads.tapatalk-cdn.com/201...52e09b7061.jpg

Sent from my GT-I9505 using Tapatalk

Right belter that, nicely done!

Nice clean looking car.

Any future mods planned?

What LEDs did you use for the sidelights? And were they just a straight fit? I got a set from an auto factors near me and I was told they were designed to fit as a straight swap but they blew within about 2-3 weeks

Looking good.

nice looking car that :)

Nice one. Done some decent business there I reckon !

Hi and welcome to the forum

James

Well spotted James.

:hi: good when you can do the work yourself.

must be another user name similar.

:):):):)

18in alloys and wind deflectors will be fitted soon and 1.8t planned for next year

Sent from my GT-I9505 using Tapatalk