zs+ 1.8 idle problems
So far i have stripped and cleaned the stepper motor and throttle bodie and check all of the pipes for any splits or leaks the stepper motor has been replaced on the 9/8/2012
here is a short video of my problem http://i656.photobucket.com/albums/u...120903_002.jpg |
Have you put a reader on it? Are any faults logged? Looks like the map sensor could be playing up. How does it drive?
|
yes i have put a code reader on it no codes logged and when the stepper pipe is connected the drives like a bang of p** accelatoring away and then backing off
|
Have you checked the stepper pipe for blockages has a coil pack failed or spark plug when was the fuel filter last changed could there be a loose plug anywhere? These are the only thing that I could think of
|
Reset the icv?
|
i have just been to the scrappies and got another map sensor and stepper motor even tho my one stepper is new as of 9/8/2012 and also a standard airbox to get rid of the induction kit
|
how do you reset the icv
|
can anyone shed any light on my problem
|
Turn the key to pos 2, then push down and release the accelerator pedal down 5 times, then turn the key back to pos 0 then try and start the car :)
|
Sticky throttle body get a aluminium one.
|
All times are GMT. The time now is 02:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk