1.8K Pistons and Liners
 

I am in need of 4 pistons and probably 4 liners from the 1.8 K series engine (its a 51 MY car if that helps)

Anyone got a set they want to get rid of? :)

I have a set of 3 pistons and 3 liners, if that's any good to you.


BTW Don't ask the obvious question.

I'm going to ask the obvious question anyway... How much for the three pistons? :p

That wasn't the obvious question that I was thinking of...

The pistons/liners that we have got are made by Federal Mogul and are labelled as 3.1496"/80.000mm. I'll have to have a think about how much I want for them. I've no idea how much we paid.

BTW the pistons come without the con rod, unlike the MG Rover part.

sorry to take this of topic slightly its always confused me as what 51MY means

(its a 51 MY car if that helps)

That above

Model Year

so mine would be MY54

:laugh: its always confused me

anyways bk on topic soz for the hijack

I assume I can remove the grudgeon pin from the current pistons and reuse the conrod from there :)

Ideally I need four... however it is only three pistons that are cracked so could "get away" with the three :) - at least to get the 45 back on the road anyway!

How does £60 per piston/liner sound?

Is that £60 per piston AND liner.... or £60 per piston and then an extra £60 per liner? - Does it include Rings?

If its the former then we're talking £180 for three?

In which case I might get one of the sets of Four pistons + four liners + grudgeon pins and piston rings for £190 off ebay!!