Result from Reidy Remaps!
 

Well i popped over to see Mick (the diamond geezer) Stamford on sunday, who fitted my brand new plenum (which had brand new VIS motors and a brand new throttle body already fitted!) and my HID conversion lights.

Today i went over to Yeovil for the re-map......

Before gave 177bhp

After a few runs and a bit of tweeking we got 196bhp

It was a hot day (28C) so i should be gettin 200bhp on a cooler day and with a heat shield around my filter!! :punk:

(Only performance mods i got is de-cat, TVR Tuscan carbon backbox and my own induction kit with ITG filter in engine bay)

Cheers again Mick....luv ya!

:blink::blink:

may have got a little carried away there, but he was bloody excellent and worked through the pain of his shagged back!

177 torques also, up from 152!

Thats impressive! Nice one!

Nice rsults :)
I'm considering a long drive down to Reidy myself ;)

Shroon

My pleasure Ric, glad to help. My daughter loves your car btw ;)

even with all the dead bugs on the windscreen!? lol

Was the low torque because of the old plenum?

I thought standard was 177lb-ft, and with mods it would be higher?? Im a bit confused cause I think Adam posted a few days ago with similar torque, but Im sure there was someone a few weeks ago with 190lb-ft with the usual mods.

Anyways though, thats a nice power figure for sure!!

the kv6 doesnt gain alot of torque tbh it gains a few bhp but not so much torque with that. the torque figure seems to be all over the place without a remap. risco before was 152ft lb, mine before was 161 ft lb but only 2 weeks before mine made 190 ft lb of torque on a different set of rollers. the remap mainly sorts the kv6 out and gets it back to standard torque (if it ever made that from the factory) rather than gain big power.