theMGZS.co.uk  :: MG ZS forum

theMGZS.co.uk :: MG ZS forum (https://www.themgzs.co.uk/vb/index.php)
-   General Discussion (https://www.themgzs.co.uk/vb/forumdisplay.php?f=14)
-   -   rattling noise (https://www.themgzs.co.uk/vb/showthread.php?t=21340)

dazzasmgzs 26-05-12 08:15 PM

rattling noise
 
hey all. got a funny noise when the cars running, it would seem like it comes from under the wheel arch on the passengers side sort of makes it sound like a diesel wandered if anyone had got any ideas/advice?

stamford 26-05-12 08:23 PM

KV6? Sounds like the purge valve, normal stuff if it quietens after a while.

dazzasmgzs 26-05-12 08:28 PM

i was quite concerned because someone said it stopped when i put the clutch down and it could have been a flywheel.

stamford 26-05-12 09:09 PM

If you have a constant rumbling noise when the engine is running and when in neutral but goes away when the clutch pedal is depressed then that normally points to a worn clutch release bearing not flywheel (unless you really want a lightened one and the O/H needs to know it is worn out ;))

Fred68 27-05-12 09:02 AM

Or worn gearbox input or lay shaft bearing!! If it's the clutch bearing? On replacement make sure to use Moly (CV joint) grease on the slider and release fork tips. I take out the whole release shaft and give it a good clean and lube with more Moly to give the clutch every chance of being silky smooth for years to come!!

dazzasmgzs 27-05-12 11:06 AM

great thats all i need :(

welshone 27-05-12 01:04 PM

Quote:

Originally Posted by stamford (Post 255567)
If you have a constant rumbling noise when the engine is running and when in neutral but goes away when the clutch pedal is depressed then that normally points to a worn clutch release bearing not flywheel (unless you really want a lightened one and the O/H needs to know it is worn out ;))

I have a noise when I press the clutch down, always thought it was the clutch bearing slowly going on me???

daytona365 27-05-12 02:24 PM

Quote:

Originally Posted by welshone (Post 255659)
I have a noise when I press the clutch down, always thought it was the clutch bearing slowly going on me???

With me, its just my dodgy kneecap !!:yikes:

Fred68 27-05-12 05:07 PM

Imho It's likely to be the box as a failed clutch bearing gets noisy as the pedal is pressed! a box bearing normaly does the reverse!! But hay it's a car and they just love to confuse us!!

dazzasmgzs 27-05-12 07:37 PM

well if nothing else im confused now. lol.


All times are GMT. The time now is 08:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk