Fogs
Hey First time new thread maker
Had a run in with rabbit at weekend http://i724.photobucket.com/albums/w...8/Photo002.jpg Was just woundering is the bracket just clipped onto bumper or screwed?? any help would be great thanks |
Screwed, in 4 places I believe!
The brackets are like hens teeth, so hopefully it's not damaged! :) |
It is little clips that go onto the bumper holding the fog light holder in place. i had mine off not that long ago when i put the fogs in mine. You may have lost the clips when you hit the rabbit, so you many need to get some from rimmers or xpart.
Stephen |
thanks for the replys quite inpressed at how quick reply wat these look like or are called tat i might have to get
i assume its a takein bumper off job |
You will need these http://www.rimmerbros.co.uk/Item--i-DYC101360
You may be able to put your hand down with the bonnet open, but id take the bumper off. 4 nuts when you open the bonnet, 4 underneath and 2 either side. Watch you dont unscrew the wing bolts instead as you may get mixed up and remember to disconnect the fog lights when you pull the bumper away. Stephen |
Quote:
|
Me and Marcus both had the http://www.rimmerbros.co.uk/Item--i-DYC101360 clips on ours when we had the bumpers off. Are you talking about the Coloured caps that are screwed into the holder. if you remove them you can fit the fogs?
|
I deffo had screws holding the bracket onto the bumper.. How odd!
I did however only look at the passenger side when I replaced the fog with a mk1 jobby, maybe a cheap accident repair? |
aww ******
|
mark 2 has screws for the blanks, or that hold the fog onto the bracket, then wee clips that hold the actual bracket to the bumper, theyll probably bee sat on the undertray still
|
All times are GMT. The time now is 05:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk