What bits do I need?
I have got to change the Reluctor Rings on my car before the MOT in a few weeks. I am going to renew the split pins but I don't know what size pins I need.
Can anyone tell me? Is there anything else I need? |
Which split pins do you need to know the sizes of.
|
The one underneath the ball joint around the outer cv area iirc.
|
You could just use a nyloc nut and bin the split pin, if you want to split pin it 3/32" should do the job.
|
you should change the hub nuts too...they are not too pricey
|
Look on Ebay as last year I picked up the whole CV joint with ring fitted for a silly price!! At the same time a got the rear hub with ring and bearing for a supprisingly low amount. I think I paid just over £20 last year for the hub and about the same for the CV joint kit with ring boot and nut !!
|
Quote:
I got these early last year for my Blue ZS, seem fine |
That's the ones ;)
|
Thanks guys, i have the rings already so may try them. If that, for some reason fails (like I split the rubber boot or something) how easy is it to replace the whole joint?
|
Easy if the joint wants to play ball, had to angle grind one Of mine off last year! Not fun!
|
All times are GMT. The time now is 06:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk