Nuts....
Just a quick silly one.....
Anyone fitted aftermarket wheel nuts they would recommend? Plenty out there but experience tells me there not all that good... Genuine from Rimmer bros are £11 each! Need 8 and think 88 quid is a bit much!! :hmmm: |
Buy a used set off a breaker on eBay bud you'll get a set for under a tenner easy
|
I have Mazda nuts on my wheels.had them for years and no problems.
|
Quote:
^^^this, they are a bit bigger so just mind and have a suitable wheel brace. They are much better as they are solid so don't fall to bits like our standard ones sometimes like to do :) |
Cheers chaps. Any particular model Mazda and when you say bigger presume you mean actual size as opposed to the shoulder size?
|
Iirc they are 19mm Simon And standard are 17mm?!? I believe any model is fine.
|
Any nut with a 60 degree taper to fit a M12 x 1.5 will work.
I normally use a 19mm socket on my wheel nuts, the Mazda 6 uses 21mm. There are some options from my ebay search for 19mm 60 M12 1.5 - http://www.ebay.co.uk/sch/i.html?_fr...2+1.5&_sacat=0 |
Quote:
|
Cheers guys
|
sets off e-bee are ok,as mentioned 60 degree are a must,got set for zr 18 month ago,still good.set with non self destruct lock nuts on zs now.chrome on dark wheels mean leave centres off.
|
All times are GMT. The time now is 12:29 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk