speakers
 

the speakers are on order. does anybody know the mouting depth of the front speakers as i have ordered shallow ones. and how are the rears removed.
where does the sound proofing stick. is it to the back of the door card or on the metal part of the door itself

That is a good question, i would also like to know if you stick it to the inside of the door or behind the speaker. It would be good to see some pictures if anyone has done this job. (what size speaers have you bought, as i bought 13cm ones and used the autoleads adaptor to makesure there was no issues with the speaker depth on the front doors.)

Probably will be too late when I post the pictures, but I have sony x plods in mine, direct replacement for the OE. I took my speaker out and showed it to the chaps in sounds alarming in newcastle and they found me one straight off. I can't post piccies as my 120 is having the motor rebuilt and it won't be ready for another week or two, but sony deffo do a direct replacement....no drilling...no connections needed adapting just out and in...if you know what I mean?

the rears have been fitted today and the difference is amazing. they are infinity 6522i. no amp needed. alot clearer and louder than standard and no more distortion when cranked up. tomorrow the fronts go in!

couldnt wait untill tomorrow to fit the front speakers so went out and done it at around 8:30. a massive improvement and crystal clear sound. and for the people who say you definatally need a amp NO YOU DONT!

what size did you use in the rear. (it is a saloon zs you have put them in?)

yea it was a saloon. i used 16.5 cm infinity's

tell you what if i ever get time of work and go to a mg meet and your there ill show you how cristal clear my standard door speakers sound on an amp :thumbsup:

this is some pics of what i got running in my zed

are you sure they are standard? and that a previous owner hasnt done they. my 45x4 head unit blew my front speakers i would have thought an amp would smash them to pieces