theMGZS track car mini update
 

Ok so as you know, this has dragged on for quite some time with not being able to get George available to do the work.

However he is refunding me shortly and I am using this and around ?100-150 of my own money to get the job done in Scotland.

This will be done on my return from honeymoon (wedding in 2 weeks) so am hoping to have it fully running in a very short time.

Sadly this will be too late for the Dreadnought track nights which are a cheaper option to Knockhill's full day events but I plan to attend atleast November's track day and all are welcome.

Once I know more I will update everyone, I apologise for the time this has taken so far.

Will be pleasing to see this finished and ready to roll. Keep us posted :thumbsup:

Will do. Over the last 7 months it has not had the best of time.

The bad snow didn't help the vinyls and the snow on the roof froze, fell and dented the front wing (in pic) and then I moved house.

Since then it has been parked in a car park next to my house which didn't please the neighbours, and the tree next to it tried to swallow it!

As there are now definate plans set to get it repaired, I moved it to outside my house to give it some much needed tlc.

This is what it looked like before I gave it a wash and polish:

http://i242.photobucket.com/albums/f...d/9d37999c.jpg

http://i242.photobucket.com/albums/f...d/e9799315.jpg

So I got to work. This involved soaking the plant sap that had created a layer over the car (this seemed to protect the vinyls at least!
Gave it a quick coat of wax just as the rain started to spitter:

http://i242.photobucket.com/albums/f...d/6760c240.jpg

Looking much better.

Only thing I need to fix is the bonnet release. The lever in the car is very loose and the bonnet doesn't fully catch. I see the 2 cables moving when I pull the lever but there is obviously an issue somewhere. May need to wait till the engine is out though?!

Anyhoo, things will be going in the right direction and when it gets taken in, it will be driven out :)

That was a sad sight! The slam panel closers tend to seize so when you close the bonnet they don't catch the spring loaded pins on the bonnet underside. The screws will need to be loosened and oil the catches and run them with a screwdriver to free them up.

Will give that a look later, cheers :)

Looks a different car, glad you can see the light at the end of the tunnel.

Bet you wonder why you started sometimes, give it a few months after its up and running and you will have forgotten all the trials and tribulations. Just all the fun you are having.

All the best.

:beer2::beer2:

Thats the car I'm talking about!!!

Best of luck to you and Kat on the wedding.

Lol cheers Pete. Considering I was just going to strip it for parts to recover the ?1k I'd spent on it I have spent many a day wondering why I bothered but that was mainly due to knowing I wouldn't have the finances until after the wedding.

Its dragged out so long that now the wedding is almost here, I will have plenty of spare cash to get it running and hopefully enjoy some meets with everyone!

Oh and as it was clean, I put the rest of the member sponsors on:

http://i242.photobucket.com/albums/f...d/ad58cf3c.jpg

Good to see you getting optimistic about your plans again mate must have been getting very disheartening looking at it in a sorry state.
Don't know why your apologising to us lot ?
You've been plenty busy moving house, wedding plans etc so I wish you all the best of luck with bringing you lil dream alive.
Shame you won't make last dreadnought night of the year with this but I hope to catch the one in a few weeks, if your not away why not stick your 110 round with mine ?

Yeah, feeling better about it now that I know its getting done soon. Will be at Disneyland on the next trackday sadly otherwise I would have taken you up on that offer.

Having a look at Knockhills site, the next plausable date I reckon is Sunday 6th November and I am off so would fit perfectly. As long as the weather is dry!