Lowering springs for non v6 on the bay!!
 

Just found this, thought it might be of interest to someone

http://cgi.ebay.co.uk/MG-ZS-Jamex-Lo...item4aa9cefc66

hmmmm sent him a question

What you ask?

if theyd fit me 110 it doesnt state if it would or not

reading the add...... they'er for the 4 cylinder cars

im assuming theyre be a difference in weight between the 110 and the 120 so just to make sure eh

You should be fine all ZS share the same rear springs, and there are 2 different front springs 1 for the diesel and V6, and the other for K4 cars, but it does no harm to check with the seller.

I've been wondering about this for ages ?

Are the Dervs and the V6 the same, IE would i look for a 180 set up if wanted to change mine?

They are the same yes, the problem being the very small choice of lowered front springs for the v6 and derv

Dont do it!!!!! Looking at the photo, these are exactly the same springs I first fitted to my Z. These are definitely for the civic and the car wont sit correct at the rear.