theMGZS.co.uk  :: MG ZS forum

theMGZS.co.uk :: MG ZS forum (https://www.themgzs.co.uk/vb/index.php)
-   Parts For Sale (https://www.themgzs.co.uk/vb/forumdisplay.php?f=28)
-   -   Rimmer bros fuel tanks (https://www.themgzs.co.uk/vb/showthread.php?t=19399)

Ritchy 23-12-11 12:08 PM

Rimmer bros fuel tanks
 
rimmer bros have fuel tanks on clearance at the moment at £40, works out at ^£61 once delivery and vat is added, just bought myself one going to get it powdercoated and fitted next year:) just a heads up

http://www.rimmerbros.co.uk/Item--i-ZUA000400

R1CSO 23-12-11 12:14 PM

may be a silly question, but what's wrong with the origial fuel tank?

Ritchy 23-12-11 12:24 PM

well mainly the mk2 they arent coated so they rust, mines not that bad but id rather buy a new one, get it coated and not worry about it ever again, coated white perhaps to look cool

R1CSO 23-12-11 12:53 PM

ahhhh, ok. thanks :o)

Boot Hill Bandit 23-12-11 04:42 PM

That is the very worst thing you can do is go and powdercoat a fuel tank Richy! If you choose to go down that route I would keep your original one as a spare to go back to in a few years! :laugh:

Ritchy 23-12-11 04:46 PM

whys that?

Boot Hill Bandit 23-12-11 05:28 PM

Quote:

Originally Posted by Ritchy (Post 231922)
whys that?

I used to run a kart race team and powdercoat all of our chassis. Any stone chips through to the metal would allow water in and then this would blister between coating and tube and blow the coating off revealing all the rust lol.

I will say this is far worse and more likely to happen on fresh metal. Once blasted there is a much better 'key' for the coating to stick to and any lifting of the coating is more localised.

All in all though fella...........the idea is pure **** for most applications where damage is likely to occur to the coating. Your best bet would be to have the entire tank etch primed and painted. It may be worth your time and effort having the side closest to the road applied with that rubberised stone chip guard stuff. That is overpaintable too so it can look tidy as well.

Just my experience and opinion but one to think about mate.

Ritchy 23-12-11 05:44 PM

fairy muff:) shall do that then, had thought of getting some sort of undercover mat sort of thing to put on it too but see what happens

Ravinder_Tomcat220T 02-01-12 10:33 PM

Yeah, they are prone to rust and leak usually at the seam. Both of mine have leaked each time. Best having a spare and rust proofing the s*** out of it before fitting it.

Enright 03-01-12 09:28 AM

What about Waxoyl? Looks 'orrible and it's a right messy pain to apply, but it's self-sealing and once on does a good job.


All times are GMT. The time now is 10:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk