Poly Bushes
I need to replace my rear anti roll bar bushes and thought I would get some poly ones
I have had a quick google but can't find them for my Mk1 Would anyone know where I can get some? A few place have them for the ZR, is the ARB the same diameter? Thanks |
|
thanks Pete, but I'm still not sure which to get. I just measured the circumference of the rear ARB and it is 60mm so if I divide that by 3.14 it is 19.1mm. Superflex don't do rear ARB bushes at 19mm, only 18mm or 20mm. They do however do the front ones in a 19mm - will the front ones fit?
|
Powerflex do a 19mm pair for the old shape 400, should I get these? They look like they'd fit!
http://www.powerflex.co.uk/road-seri...+19mm/734.html |
Measure the diameter with an adjustable spanner if you don't have a vernier caliper, I think it would be more accurate than the circumference divided by pi.
The front and rear aren't interchangeable. |
Your rear arb should be 20mm.
|
19mm measured with adjustable spanner....
so will these for the old 400 work? http://www.powerflex.co.uk/road-seri...+19mm/734.html Appreciate your help with this :) |
Yes, they'll be fine, the zs shares the same rear suspension as the old shape (R8) 200 and 400, also a point of interest that another zs with the wrong rear arb fitted.
|
Mine is 20mm as the stamp on it confirms (removed it today and sanded it down ready to paint)
Rob |
Hmmm. well I have triple checked and it is 19mm, and I have ordered some, hope they'll fit! :P
I have just noticed if I try to push/pull the ARB then I hear a clanging noise, hopefully these bushes will resolve....! Thanks guys |
All times are GMT. The time now is 03:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk