oil catch tank
 

anybody got any pics? especially the people running 2 as im unsure where one goes and where to mount them

i have a picture of my pipe work if thats any help,

http://i8.photobucket.com/albums/a11...ICT0001-26.jpg

http://i8.photobucket.com/albums/a11...ICT0002-18.jpg

http://i8.photobucket.com/albums/a11...ICT0003-22.jpg

http://i8.photobucket.com/albums/a11...ICT0004-24.jpg

This is where I mounted mine, used existing mounting holes. Pipes have since been changed for high pressure ones, these were no good.
http://i98.photobucket.com/albums/l2...0/DSC05900.jpg

yeah, use a good quality pipe as the silicone ones collapse under the vacumm, i ended up using fuel pipe

stamford thats looks really smart. do you mind me asking where you got the tank and bracket from

I got the tank off ebay, was around £35, it looks identical to the one Moto-Build offer for around the £70 mark! Bracket is home made from 16swg ally.

any body with 2? mine is the same as stamfords but where does the otyer one go??? i have so many different ways that these have been fitted but what one is atchually correct?

Mine does the job, catches oil!

i have got two on mine i shall try and get some pics for you today and load them up later

as requested here are the pics of both catch tanks fitted to mine.

the one on the front left is connected to the larger of the two hoses and the other one on the bulkhead is connected to the smaller hose.

hope this helps.