I would double check the connection so that the ring connector is perfectly flat on the metal of the car... i had this problem in my clio before, i tightened up the bolts and it was fine.. i woudl get a battery terminal cleaner they're only cheap, clean up the terminals and put the wax over them to stop them going skanky, and tighten up the bolts. If not, try a ground that is factory standard and see if it does the same thing.
also cut the ground wire as short as possible.
__________________
To do:- New tyres all round
- Aircon re-gas
- Replace/fix rattly mirror
- Mark 2 dashboard
- Catch tank
- New VIS motors
- Fit bucket seats
- Induction kit
- New spark plugs + oil change
- New exhaust
- Decat
- Fix drivers seat mounting hole
- Reidy Remap
|