theMGZS.co.uk :: MG ZS forum - View Single Post

Maxxed_Ross · 21-03-10, 10:12 AM

For sale

Brand new, never out of the box Scangauge II

The ScanGuageII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the "Check Engine" light and avoid those costly trips to the mechanic

Display 4 gauges at a time from the 12 built-in digital gauges. the information is presented in Real-time!

Automatically tracks four sets of trip data - Each with 11 individually stored parameters.

The compact size of the ScanGaugeII allows you to mount just about anywhere. it's so small, you can even slip it into your pocket and take it with you.

The dimensions of the ScanGaugeII are 4.8" wide by 1.5" high by 1.0" deep. The cord from the diagnostic connector to the control/display is 6' long and about 0.2" in diameter.

The cable is detachable at the ScanGauge II and can be connected on the back or side of the unit. Once connected to your vehicles OBDII port, the ScanGaugeII automatically negotiates communications with your cars computer - It's that easy!

see

http://www.scangauge.net/

and

http://www.scangauge.net/products/product.html

for more info and some pictures

Postage will probably be about £5 for normal postage, can be sent special/recorded if required at extra cost

These retail at around the £130 mark, I'm after £100 ono

21-03-10, 10:12 AM	#1
Maxxed_Ross Events Organiser-Scotland Join Date: Jul 2007 Location: Livingston Posts: 7,667	Scangauge II For sale Brand new, never out of the box Scangauge II The ScanGuageII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the "Check Engine" light and avoid those costly trips to the mechanic Display 4 gauges at a time from the 12 built-in digital gauges. the information is presented in Real-time! Automatically tracks four sets of trip data - Each with 11 individually stored parameters. The compact size of the ScanGaugeII allows you to mount just about anywhere. it's so small, you can even slip it into your pocket and take it with you. The dimensions of the ScanGaugeII are 4.8" wide by 1.5" high by 1.0" deep. The cord from the diagnostic connector to the control/display is 6' long and about 0.2" in diameter. The cable is detachable at the ScanGauge II and can be connected on the back or side of the unit. Once connected to your vehicles OBDII port, the ScanGaugeII automatically negotiates communications with your cars computer - It's that easy! see http://www.scangauge.net/ and http://www.scangauge.net/products/product.html for more info and some pictures Postage will probably be about £5 for normal postage, can be sent special/recorded if required at extra cost These retail at around the £130 mark, I'm after £100 ono __________________ ------------------------------ ------------------------------ __________________ ------------------------------ ------------------------------ __________________ www.facebook.com/EX259 "It's not broken, it's an opportunity to upgrade!"