theMGZS.co.uk :: MG ZS forum - View Single Post

25-10-07, 04:51 PM

The zed past its first MOT today one advisory on the offside wheel bearing, turns out the nut that holds it in was not as tight as it possibly should be, got it tightened problem solved.

25-10-07, 04:51 PM	#1
grimmy Guest Posts: n/a	Woohoo The zed past its first MOT today one advisory on the offside wheel bearing, turns out the nut that holds it in was not as tight as it possibly should be, got it tightened problem solved.