[KirkJames]

Originally Posted by Jay-ZS+

I used 2 90deg aluminium bends and some 76mm silicone.
I actually have 600mm of silicone tubing left as I only used 400mm and bought a meter. Also I have a breather but it wont bolt straight on believe its 25mm diameter but will check if wanted. I think I may have some of the flexi Neoprene tubing thats also 76mm that I decided not to use.

76mm bends


76mm silicone


My setup

That looks like what I am after mate, going to go for a cheapo open cone for now until after christmas then upgrade.

Originally Posted by big_wasa

Tb is about 71mm. 70mm (2" 3/4) is a standard size but 76mm (3") is cheaper and more common.

So my idea for a cheap induction kit is

a 76/70 reducer. ?6


then a stainless bend, not alloy so I can Tig weld a "T" in for the idle ?12


Options then are more pipe work to the inner wing with a quality open cone filter or a budget induction kit. ?45


Did you see the post on the guys that had the ITG style hose made by PSH ?

I was going to give them a ring today, they may be more interested if they are making up a batch instead of one

Just a cheap one for now will do but all ideas worth mulling over, like I said after christmas I will prob go for the ITG/K&N Apollo kind of thing .

Thanks for the help guys