If it is the VIS motors (Balance and Power), then they are an easy fix depending on what is wrong with them!
Power Motor (Situated at the upper front of the engine) - Usually this is poor soldering on the PCB, resolder the micro switches and affix with a small self tapping screw.
Balance Motor (Situated at the Left hand upper side of the engine) - This is usually full of oil. due to the breather system on the KV6, so sometimes these can be cleaned, if not then a replacement will be required.
If, the internals of the Plenum chamber are knackered then the whole unit will need replaced, no other way I'm afraid.
__________________
Last edited by KevG; 06-11-07 at 07:56 AM.
|