Quote:
Originally Posted by Jay-ZS+
Well I calculated that using the same bmep and specific power as mine with the 270 cams. Working backwards to find power and torque, not the most accurate I know but better than picking numbers out of thin air
|
well yes, but usually you get roughly the same percentage power gain as you have increased the cubic capacity by, so if you increase cc by 12 percent ,you will gain roughly 12 percent power and torque ....which is approx 20 bhp and 20ft lb torque.
not a bad gain that for a bit littler pulley drew, i think that's what garymgzs180 on here did, went for more boost from littler pulley and his is making good power.