Since then I have done a lot of research into both 45 and 75/ZT cruise control and found that they mostly share the same system but the ECU's are wired differently.
These are the ECU and actuator parts required:-
Rover 45
Cruise control relay - behind passanger footwell kick panel - part no SCB100202 - (it is not the yellow relay with the diode, it is a black box)
Cruise control ECU - behind centre consol - part no SCB100190
Actuator pump - under battery tray - part no SCC100030 or SCC100030L
Actuator - next to throttle body
Rover 75/ZT/ZT-T
Cruise control relay - above passanger footwell - part no SCB100201
Cruise control ECU - above passanger footwell - part no SCB100190
Actuator pump - top left hand corner of engine bay low down on the bulk head - part no SCC100030 or SCC100030L
Actuator - next to throttle body
The Freelander KV6 uses the same parts but I have no idea of location.
Many of these bits are still available from Rimmers and eBay but they are considerably more expensive.
In the next post I shall give you some more of the parts required.
I will also give some of the wiring info - as this requires some skills such as wiring, breaking into engine managment systems etc it won't be a full how to, just some useful info if you are considering the same.
__________________
Former custodian of the legend that was FE54 - RIP
|