Dan, I'm afraid I just fit it, it was a VVC engine with forged pistons bored to 1.9 everything totally brand new. It has been developed with Emerald as it runs an Emerald ECu with variable mapping. The supercharger is from a Mini Cooper and the owner has designed and built an amazing intercooler set up.
Emerald have predicted 270bhp but to add to that he also has a 100bhp NOS kit. The engine has its own plumbed in fire extinguisher kit and there is a hydraulic rear airofoil on the boot that is connected to both the engine output and the brake system with a manual over ride.
The whole car is a developent projectand the owner is a very competant and accomplished designer/engineer/mechanic. We were only facilitating the build engine swap as we had the equipment and some knowledge. The owner will be completing the rest of the build up.
Fairly major job dropping the engine, gearbox and subframe - Ed China style - onto my toolbox, then using the ramp to lift out the engine. once out the subframe and gearbox were lifted onto the floor and the partially built engine was hoisted into the waiting subframe. Then the whole lot was bolted back into the car.
This was all made a bit more complicated as the F runs hydro elastic suspension which needed degassing for detachment and then regassing once complete. Plus all the other bolt ons, pipes for NOS and extinguishers, wiring looms for data logging etc.
He has promised to bring the car round once it is complete.
this is the engine
this is the engine in the bay
and Walker.....nope no surfing in the 180...guess again