Quote:
Originally Posted by petet16
You're right about mixing Pektron and pre Pektron bits, but it might be possible to swap the maps from the old ecu.
|
Even if I changed the whole set? 5as and everything it still wouldnt work?
Quote:
Originally Posted by Enright
The ECU is coded to the Pektron unit which is behind the heater panel (can't remember if it's called the Body Control Unit or the Body Systems Interface), but you're right - the old one won't work. And if you try it, you'll most likely get an error light on your dash that you can't get rid of, so don't be tempted!
Pete's right too - someone like Reidy's certainly should be able to take a flash reading of your existing ZR map and copy it to the ZS ECU.
|
Yeah its called the BCU..
Matt Reidy was the one who mapped my ZR on his rolling road, I might have a work see if he will switch the maps over and tweak the ZS on the rollers for me
Means driving down to Somerset again though.. 470 miles round tip, 5 hours each way, wooo
