theMGZS.co.uk :: MG ZS forum - View Single Post

petet16 · 14-05-13, 05:34 PM

The tails are about 15" long, 2 at each lower corner, and fitted to the edge of the glass, and are left outside when the screen is fitted.

I've had another look at the wiring diagram for the hrw on a mk2 and decided that the easiest way to wire it is by splicing into the feed that operates the relay for the rear screen to operate a fused relay for the front screen, and take a power feed from the ignition switch for the heating elements, it'll save having another switch, and will mean the front screen is timed like the rear one.

14-05-13, 05:34 PM	#10
petet16 Technical Expert R.I.P. Join Date: Aug 2007 Posts: 9,239	The tails are about 15" long, 2 at each lower corner, and fitted to the edge of the glass, and are left outside when the screen is fitted. I've had another look at the wiring diagram for the hrw on a mk2 and decided that the easiest way to wire it is by splicing into the feed that operates the relay for the rear screen to operate a fused relay for the front screen, and take a power feed from the ignition switch for the heating elements, it'll save having another switch, and will mean the front screen is timed like the rear one. __________________ ------------------------------ ------------------------------ __________________ It never got fast enough for me Hunter S Thompson R.I.P. Peter David Scott 18.07.59 to 21.11.16 Will be missed by us all but we will always remember you.