Quote:
Originally Posted by petet16
The tails are about 15" long, 2 at each lower corner, and fitted to the edge of the glass, and are left outside when the screen is fitted.
I've had another look at the wiring diagram for the hrw on a mk2 and decided that the easiest way to wire it is by splicing into the feed that operates the relay for the rear screen to operate a fused relay for the front screen, and take a power feed from the ignition switch for the heating elements, it'll save having another switch, and will mean the front screen is timed like the rear one.
|
I think that's what I will do but have been looking at the door lock switch wondering where that could be relocated to............have 2 heated screen switches but the front only working when the rear is as the front normally clears quicker than the rear.
It would be really useful to have a how to as I was driving around north London wondering how hard it can really be.