Quote:
Originally Posted by maxtherotti
Only issues im aware of is the pads sticking in the calipers but not a issue if properly refurbed
unless im missing something??
Rob
|
Issues I had were lower ball joint rubbing on the disks under hard cornering, even with the shims behind the discs and that wasn't lowered... Had pads sticking, but a refurb fixed that... Any more spacers and you need longer studs in the hubs and then your front wheels have a wider track than your rear wheels... (I really needed longer studs TBH)
Those are just the issues I had... there are loads more documented elsewhere...