Recently had the ZS on the rollers, so in preparation thought id have a look at my brakes as im sure the drivers front was binding slightly, and it was!
Sliders were seized in, so cleaned them up all round, slapped loads of grease on them, put it all back together and that sorted it.
Also painted all the brakes while I was at it, as they were a tad rusty..
Finally got my backbox on, ended up finishing it in the dark, so its not as perfect as id like, but not a bad attempt, just sticks out a bit too much
Il have it off when I get change and cut an inch or two off the pipe leading to the backbox and re-weld it..
Also treated myself to a dark ice front brace..
Got it fitted..
Before..
After..
Was a bit tight going on, its fairly close to a few things but doesnt touch so its all good!
Had to bend this aircon pipe out the way to get it on..
Also ordered a new drivebelt to do with the cambelts when I get round to it, all Gates Powergrip
Found out the hard way that, crap weather, extra torque and cheap tyres isnt a good mix!
:facepalm:
And thats how it stands so far!
Quite happy with it at the moment
I did have it on the rollers, heres a quick pic..
Will upload a video a bit later, with the results
