theMGZS.co.uk :: MG ZS forum - View Single Post - How easy is it to swap a Mk2 drivers side wing?

talkingcars · 29-08-14, 05:26 PM

It took me about an hour, there are 5 bolts on the top edge, one hidden under the wing liner close to the front of the while arch, 2 visible down the door shut and one at the bottom behind the sill cover.

The one under the arch can be reached with a extension on your socket by bending the liner down, there is no need to remove the liner The one under the sill cover with a ring spanner after levering the sill cover out a bit, personally I didn't replace it.

All bolts are 10mm.

29-08-14, 05:26 PM	#2
talkingcars Member Join Date: Feb 2008 Location: UK Posts: 10,493	It took me about an hour, there are 5 bolts on the top edge, one hidden under the wing liner close to the front of the while arch, 2 visible down the door shut and one at the bottom behind the sill cover. The one under the arch can be reached with a extension on your socket by bending the liner down, there is no need to remove the liner The one under the sill cover with a ring spanner after levering the sill cover out a bit, personally I didn't replace it. All bolts are 10mm. __________________ Former custodian of the legend that was FE54 - RIP Last edited by talkingcars; 29-08-14 at 05:28 PM.