Quote:
Originally Posted by peterzs
Well done loads of work.
Remember when I gave a hand to get an engine out the roll pin was a pain and we ended cutting off the selector rod.
So many wires and sensors to plug back in.
Good luck with it.
|
Oh it was awful even with a correctly sized drift. Obviously when it was out the pin came out without a hitch 😩
I’ve labelled everything on one loom so it should be easy enough to put them back where I found them!
I had a lot of warnings to do so prior to starting and I’ve even labelled bolts into sealable packets 😂
Quote:
Originally Posted by LukeZS96
I suppose I'll be the first vulture then. What are the door handles on that old ZS like and what interior trim Does it have? Cheers
|
It’s a bit mismatched in the handle department, it has two green on the drivers side and only one grey one on the front passengers side so isn’t a complete set either.
The interior is standard mk2 door cards with red Monaco seats.
It has rear electric windows and the door cards haven’t got the wonder holes so are a good set.
Incidentally I have Chrome heater rings from previous scrap yard hunts.