theMGZS.co.uk :: MG ZS forum - View Single Post

Maxxed_Ross · 15-01-09, 10:16 AM

no you just need a bit of vacuum pipe to connect it into the Viper

I'm not 100% sure on this, so correct me if I'm wrong anyone - the idle intake sucks in a small amount of air to keep the engine going when the throttle is fully shut. I=On the ZS it's right above the main throttle and there's a split pipe out of the rubber throttle hose that runs into it

Your car might not actually have one, as the ZR didn't and I had to plug the hole up on my Viper with tape

I'll have a look at yours next time you're down and see if we can find if your car as one

15-01-09, 10:16 AM	#14
Maxxed_Ross Events Organiser-Scotland Join Date: Jul 2007 Location: Livingston Posts: 7,667	no you just need a bit of vacuum pipe to connect it into the Viper I'm not 100% sure on this, so correct me if I'm wrong anyone - the idle intake sucks in a small amount of air to keep the engine going when the throttle is fully shut. I=On the ZS it's right above the main throttle and there's a split pipe out of the rubber throttle hose that runs into it Your car might not actually have one, as the ZR didn't and I had to plug the hole up on my Viper with tape I'll have a look at yours next time you're down and see if we can find if your car as one __________________ ------------------------------ ------------------------------ __________________ ------------------------------ ------------------------------ __________________ www.facebook.com/EX259 "It's not broken, it's an opportunity to upgrade!"