theMGZS.co.uk :: MG ZS forum - View Single Post

Mossy88 · 29-07-12, 03:19 PM

The mg that I have is the 1.8 zs. Now the problem is all from fitting a new head after hg failure, a guy put it back together but was wrong the exhaust cam was 180 out so wouldn't fire up.

I stripped it of its cam belt and realigned them how they should be and refitted the leads the right way around.. There is new plugs in and there is fuel getting in but some reason it's still not firing up,

Can someone please shed some light on this and where I'm going around,

Thanks. Danny

29-07-12, 03:19 PM	#1
Mossy88 Member Join Date: Jul 2012 Posts: 20	Still not starting guys,any advice?.. The mg that I have is the 1.8 zs. Now the problem is all from fitting a new head after hg failure, a guy put it back together but was wrong the exhaust cam was 180 out so wouldn't fire up. I stripped it of its cam belt and realigned them how they should be and refitted the leads the right way around.. There is new plugs in and there is fuel getting in but some reason it's still not firing up, Can someone please shed some light on this and where I'm going around, Thanks. Danny