|
Well all the work in spraying is in the prep. As long as what you are spraying is smooth then your got a good chance the finish will be too.
I started off by sanding to right up to 600 grit
Then a coat of halfords plastic primer,
Then using a Devibiss Gti gun gave it about 3 coats of waterbased trophy blue lightly rubbing it back between coats with the 600 grit then the last coat I left and didnt rub back,
Then 2 coats of an 2k acrylic clearcoat,
Rubbed this back with 1500 grit and plenty of soapy water to flatten it off,
Buffed it up with 3M finishing compound then went over it with scratch X, Ive got a spray gun as I use it for work ( spraying furniture) and a cheap buffer,
But if your only spraying a door handle then you could get away with using cans and buffing it by hand just with the scratch X.
__________________
------------------------------
------------------------------
__________________
James
2012 BMW 320d Sport
|