theMGZS.co.uk :: MG ZS forum - View Single Post - MG ZS MK2 - XPower 120+

theboynoz · 12-05-15, 07:28 PM

Cleaned a shell up to see if it can be salvaged or needs sand blasting..... The verdict is not good, May sand blast them, as the inside edge is knackered and paint flaking! Will post pics of how clean they came out, also tried to polish the bolts a wee bit.... Meh

In other news I'm not going to replace the calliper myself, I've still only gotmhalf a toolset after my garage flooded at my last house so I'm going to ask the garage down the road to sort callipers and discs when they do the brake pipe for me, will be a lot quicker! Need to buy the discs/pads now though, as the offside are truely foobarred!

12-05-15, 07:28 PM	#25
theboynoz Member Join Date: Oct 2011 Location: Redditch, Worcs Posts: 525	Cleaned a shell up to see if it can be salvaged or needs sand blasting..... The verdict is not good, May sand blast them, as the inside edge is knackered and paint flaking! Will post pics of how clean they came out, also tried to polish the bolts a wee bit.... Meh In other news I'm not going to replace the calliper myself, I've still only gotmhalf a toolset after my garage flooded at my last house so I'm going to ask the garage down the road to sort callipers and discs when they do the brake pipe for me, will be a lot quicker! Need to buy the discs/pads now though, as the offside are truely foobarred! __________________ If a job's worth doing, it's worth doing right! If it's not worth doing, give it to Rimmer! Drives: ZS MK2 - XPG 120+, Climate Control, Leather/Alcantara, standard so long as you ignore the backbox, and brilliant fun to drive! Mondeo MK3 LX - Silver, family runabout, 1.8 16v, standard, does the job!