theMGZS.co.uk :: MG ZS forum - View Single Post

petet16 · 21-08-14, 12:01 PM

As promised, some pictures, first up is the drivers side, it has been clear coated, poorly, so will need sanding back and polishing, it also has a blemish on the inside surface of the transparency, you can just make it out in the second picture on the top edge, between the inner and outer light unit, I'm certain it would polish out if the unit was opened up.

On to the passenger side, this one just needs some more time with a mop, and plastic polish, but, it has a small chunk out of the corner of the indicator, clearly shown in the second picture.

21-08-14, 12:01 PM	#8
petet16 Technical Expert R.I.P. Join Date: Aug 2007 Posts: 9,239	As promised, some pictures, first up is the drivers side, it has been clear coated, poorly, so will need sanding back and polishing, it also has a blemish on the inside surface of the transparency, you can just make it out in the second picture on the top edge, between the inner and outer light unit, I'm certain it would polish out if the unit was opened up. On to the passenger side, this one just needs some more time with a mop, and plastic polish, but, it has a small chunk out of the corner of the indicator, clearly shown in the second picture. __________________ ------------------------------ ------------------------------ __________________ It never got fast enough for me Hunter S Thompson R.I.P. Peter David Scott 18.07.59 to 21.11.16 Will be missed by us all but we will always remember you. Last edited by petet16; 21-08-14 at 12:07 PM.