theMGZS.co.uk :: MG ZS forum - View Single Post

stamford · 12-09-12, 01:41 PM

I did my own, used the ZS runners and seatbelt mounts so as to use the standard seatbelt and a harness. Bought some 30x6mm mild steel and made 2 off brace bars between the two runners and this was what the seat bolted to (bottom mount type seat).

Best check to make sure if using a side mount that it is okay to pass the current MOT regulations as this type is usually fixed.

12-09-12, 01:41 PM	#7
stamford Site Owner Join Date: Jul 2007 Location: Waterlooville, Hants Posts: 24,096	I did my own, used the ZS runners and seatbelt mounts so as to use the standard seatbelt and a harness. Bought some 30x6mm mild steel and made 2 off brace bars between the two runners and this was what the seat bolted to (bottom mount type seat). Best check to make sure if using a side mount that it is okay to pass the current MOT regulations as this type is usually fixed. __________________ ------------------------------ ------------------------------ __________________ Some useful links: Become a Site Supporter Site stickers ZS buyers guide part 1, ZS buyers guide part 2, ZS buyers guide part 3. Become a site trader Site rules Site Supporter & Payments Not Showing