Quote:
Originally Posted by talkingcars
I wouldn't have thought you'd manage a very good job doing it in situe as the glue will want to run.
Apart from the drivers door there is only 1 rod to remove and all you have to do is spin the handle around it (note how many turns so you do the same when refitting). Obviously there is also the rod on the door card but you'd have to remove the card to get acess to the back of the handle anyway.
Then use some arildate to glue the brass bits back in.
|
Meant glue in a philisophical way. Bodyshjop would use something bit stronger lol
heres a pick of damage....