To remove rear calipers you will need standard size sockets and a pair of needle nose pliers to remove the pin on the end of the hand brake cable. They are on carriers like the fronts so same principle to remove.
You will probably need to wind in the new calipers to fit them over the disc, to do this just use any "ruler" shape tool such as an old file or something.
You will then need to re connect the brake hoses and hand brake followed by bleeding them. If they use banjo bolts (cant remember) then a few new sealing washers would be a good idea.
__________________
ZS Turbo!!*cough* (diesel)
|