Thread: T16
View Single Post
Old 02-03-20, 11:55 AM   #48
ZS
IT Administrator
 
ZS's Avatar
 
Join Date: Oct 2007
Location: Winchester-ish
Posts: 5,092
ZS is a glorious beacon of lightZS is a glorious beacon of lightZS is a glorious beacon of lightZS is a glorious beacon of lightZS is a glorious beacon of lightZS is a glorious beacon of light
Finally got the engine back together this weekend and topped up all fluids.

Car initially fired up with a very obvious missfire, turns out one of the HT leads was not pushed in firmly enough.

Once that was sorted the engine runs, but not as smooth as I would like... There is a very slight lumpiness to the engine and it seems to threaten to stall every now and then.

Since this appears to be the Mems 1.6 ECU (Dizzy engine from a 420 Turbo) I can't just put it on my normal Diagnostics.

To this end, does anyone, localish to Bordon, have a T4 or PScan or another Diagnostics that will connect to the Rover 3-pin plug on the ECU so I can check all the sensors etc? I am hoping that will tell me, or at least guide me, to the root of the "something is not quite right".
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
zs@themgzs.co.uk

I love it when people call me at 3 AM. "Hey, you asleep?" "No, I'm skydiving."

http://www.bexairbrushing.co.uk
ZS is offline   Reply With Quote