|
I used 16mm2 welding wire but tbh I think it needed to be bigger.
I use an audio splitter block where the battery used to be. Then drop a cable to the starter and the fuse box. Some just wire to the starter and then a 2nd from starter to fuse box. Will work either way.
I have a very large fuse at the battery end. As close to the positive terminal as possible.
I just drilled the floor in the spare wheel well and fitted an earth point. Whatever bolt you want to use. Make sure your getting clean metal, even if that means grinding some body/ bracket to make sure.
I pulled the original tray from the front end and drilled through the floor just in front of the rear passenger light cluster. Bolted the tray down there. If your desperate some batteries have a vent pipe you could drill through the floor too but I never did. No I'll effects that I'm aware of!
Drew
|