[Rossy]

I had problems with original clutch not being able to engage gear so as advice on here folk said it could be seized release lever so had to take the box out so just as well to replace the whole clutch assembly, and as had problems with hydraulics before so covered all angles to make sure and fitted a sheddist kit,when the box was out the oem release bearing was pretty rough and the lever was sticky so thought I had that sorted by new bearing and really giving the arm a good clean and re grease was working fine, put the box back in and tried the lever arm seemed fine installed the sheddist kit bled it as described.So while car was up in the air was wanting a De-cat pipe as supplied by Goldie but damaged the o2 sensor on the manifold getting the original cat out !!!! seized bolts so angle grinder slipped hence new o2 sensor ,which all took a good few weeks to get all back together and to try the clutch out proper like ..... and now this .....
Thanks guys for the great helpful comments as always .... but as someone said somebody somewhere doesn't want my ZS back on the road !!! been along time ..just taken strong pain killers for the back and I'm away to have a large dram to numb the pain and the broken heart !!!! cheers ....