Update.. well took the gearbox out and the release bearing is fine and moving freely but when I took the pressure plate off the clutch plate was stuck to the pressure plate and separated the clutch plate and its like slight rusty marks and an imprint of the clutch plate on the face of the pressure plate !!!!!!! Has anybody got any ideas as to this ?? was hoping it was just the release bearing but now ..not a clue ,Have checked to make sure it's the right clutch for the 180 ..details are Valeo no: 700690 MC-5 pressure plate and clutch plate no:689109 240613 / 07 46 <246> L2 .. Anybody got suggestions or had similar problems !!! would be truly grateful for advice ..... Thanks Again
__________________
nah I've been ripped off by an old Rover ..no way ...
|