theMGZS.co.uk :: MG ZS forum - View Single Post

MG ZS STE · 19-05-16, 10:25 AM

I need the plug from the loom end for the 02 sensor from bank 2 sensor 1, with about 3 to 4” of loom left on. You can get access to this easily from the left side of the engine (facing the car) near the rear cam cover.

Mine got ripped out when it got wrapped around the drive shaft. I had a spare 02 sensor but the wires were damaged on the loom side of the plug so I need to cut the old plug off and solder on a new one.

19-05-16, 10:25 AM	#1
MG ZS STE Site Supporter Join Date: Jan 2010 Location: West Mids Posts: 2,420	anyone breaking a 180 ATM I need the plug from the loom end for the 02 sensor from bank 2 sensor 1, with about 3 to 4” of loom left on. You can get access to this easily from the left side of the engine (facing the car) near the rear cam cover. Mine got ripped out when it got wrapped around the drive shaft. I had a spare 02 sensor but the wires were damaged on the loom side of the plug so I need to cut the old plug off and solder on a new one. __________________ ------------------------------ ------------------------------ __________________ The 180s the one you want, ain't no replacement for displacement.