Painted Calipers

[StragglaSteve]

Finaly got round to painting my calipers!

heres a quick piccy for your enjoyment/critic!



hopfully next month i will have my bucket seats fitted!

[stamford]

Nice rims, Kei Kruze? I was thinking about getting them before I decided on the Inovites.

[peterzs]

Certainly look a lot better than my rusty looking ones, well worth the effort.

[StragglaSteve]

Originally Posted by stamford

Nice rims, Kei Kruze? I was thinking about getting them before I decided on the Inovites.

yeah 18" Kei Kruze... bloody heavy compared to the 16" OE hairpins i had!

if i had known that before ordering it MIGHT of swayed my desition buuuut these were picked purley on looks

cars lookin a bit high in that photo because ive actully got the rear of the car jacked up as i was doing the rear calipers! but i plan to get the arches rolled out and some Xpower lowering springs chucked on

you should give it a go pete! does take a bit of time and cant use the car for 24hours once done, but worth the effort! my rims just didnt look quite as nice when i had a big brown lump of rusty metal sitting behind it lol

[peterzs]

Just had some new rear disks on mine, for the first month looked nice and shiny, now aghhhh rusty red.

Yes, think I will have a go at mine, yours finish the wheels off.

[Jay-ZS+]

If your planning on stripping it steve Id suggest you recommend coils as once stripped will sit quite high at the back on xpowers.

Callipers look good mate, they are on my list as well.

[Maxfly]

amazing the difference a lick of paint on calipers makes, looking fesher

[StragglaSteve]

Originally Posted by Jay-ZS+

If your planning on stripping it steve Id suggest you recommend coils as once stripped will sit quite high at the back on xpowers.

Callipers look good mate, they are on my list as well.

**** really?

was hoping i could get away with just chuckin on some lowering springs temporarily until i can afford to get a proper coilover kit

how much weight can i lose before i should start thinkin about the coilovers?

was only really planning on taking out the rear seats, belts and spare wheel!

[Jay-ZS+]

Originally Posted by StragglaSteve

how much weight can i lose before i should start thinkin about the coilovers?

No Idea tbh , only thing I could suggest is that you measure the height on std springs remove the rear seats and spare, doesnt take much to remove the seats. Then measure how much its raised up. That will give you an idea of the how much it will raise on xpower springs.

It may not be that much but better to find out before going to the hassle of changing the springs.

My guess is that with the xpowers it will be very slightly lower than standard once stripped. It will just be the difference between the front and rear as obviously you wont be loosing any weight up front.

[StragglaSteve]

Originally Posted by Jay-ZS+

No Idea tbh , only thing I could suggest is that you measure the height on std springs remove the rear seats and spare, doesnt take much to remove the seats. Then measure how much its raised up. That will give you an idea of the how much it will raise on xpower springs.

So simple! why didnt i think of that?